-
Desiccant Air Dryer | This DRIERITE Disposable Desiccant Cartridge dries displacement air entering storage drums to -100° F dew point.
-
Extreme Air Purge Gun | This economically priced gun weighing a mere 2.4 lbs (1.1 kg) is one of the lightest and smallest plural component spray guns on the market today. The Chamber, PCT, Screen Screw Parts, Coupling Block and Check Valves are the same parts used in the proven PMC AP-2 Air Purge Gun. FINANCING AVAILABLE
-
Heated Hose with Blue Mesh Scuff Guard | 3/8 in x 50 ft Hose, 2000 psi (138 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Powerful and Responsive - With 01 Mixing Chamber | The Probler P2 spray gun is ideal for both polyurethane foam and polyurea applications. Its advanced double-piston design ensures the P2 is lightweight and easy to maneuver, without sacrificing performance. FINANCING AVAILABLE
-
Plural-Component Spray Gun with 01 (AR4242) | For high output spray polyurethane foam and polyurea applications. FINANCING AVAILABLE
-
Plural-Component Spray Gun with 02 (AR5252) | For high output spray polyurethane foam and polyurea applications. FINANCING AVAILABLE
-
High Output 2:1 Transfer Pumps | SprayEZ Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals. FINANCING AVAILABLE
-
SPRAYEZ WHIP HOSE 1/4 in x 5 foot ft Hose, 3,000 psi (206 Bar) Compatible with PMC. GRACO FINANCING AVAILABLE
-
AP-2 Air Purge Gun - Round with 02 Mixing Chamber | This economically priced gun weighing a mere 2.4 lbs (1.1 kg) is one of the lightest and smallest plural component spray guns on the market today. The Chamber, PCT, Screen Screw Parts, Coupling Block and Check Valves are the same parts used in the proven PMC AP-2 Air Purge Gun. FINANCING AVAILABLE
-
SYSTEM, EXP1, 10KW, 230V, 3PH, FUSION AP | For polyurea coatings - applies up to 2 gal (7.6 liters) per minute. FINANCING AVAILABLE
-
Powerful and Responsive - With 01 Mixing Chamber | The Probler P2 spray gun is ideal for both polyurethane foam and polyurea applications. Its advanced double-piston design ensures the P2 is lightweight and easy to maneuver, without sacrificing performance. FINANCING AVAILABLE
-
Heated Hose with Blue Mesh Scuff Guard | 3/8 in x 50 ft Hose, 3500 psi (241 Bar) with RTD fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Blue Mesh Scuff Guard | 3/8 in x 50 ft Hose, 2000 psi (138 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Xtreme-Wrap | 3/8 in x 50 ft Hose, 2000 psi (138 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Whip Hose with Xtreme-Wrap | 1/4 in x 10 ft Whip Hose with Xtreme-Wrap, 2,000 psi. Compatible with Reactor 1 & 2 proportioners The whip hose is designed to be lighter weight and offers improved flexibility using materials that are more durable and have higher temperature ratings.This whip hose also includes the newest electrical configuration that removes all electrical connections from near the gun. FINANCING AVAILABLE
-
Compressed Air Dryer | The ADS Schulz line of air dryers was designed to facilitate inspection and maintenance operations. The panels are easily removable and allow immediate access to internal components. FINANCING AVAILABLE
-
Transfer Pumps | Ideal for moving A and B materials to Reactor spray machines. FINANCING AVAILABLE
-
IP-02 Stubby Length, Carbon Steel Transfer Pump (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. FINANCING AVAILABLE
-
PX-7 1/90 Mechanical Purge Gun | PX-7 incorporates a valving rod to mechanically purge the mixed material from the mixing module at the end of each shot; eliminates the need for solvent flushing or air purge. FINANCING AVAILABLE
-
SprayEZ Sale! For a limited time.Spray foam rig with CARLISLE IS30 6-zone proportioner and a diesel generator. The CARLISLE IS30 Reactor delivers 30lb per minute. All air and transfer Hoses are included.
CLOSE OUT SPECIAL - REG: $83,995
$69,995 | CALL TODAY!
NEED FINANCING? WE CAN HELP. APPLY NOW!
-
Transfer Pumps | Ideal for moving A and B materials to Reactor spray machines. FINANCING AVAILABLE
-
SPRAYEZ Heated Hose with Blue Mesh Scuff Guard 1/4 in x 10 ft Hose, 3,000 psi (206 Bar) Compatible with PMC. GRACO FINANCING AVAILABLE
-
PMC PREMIER | The PMC PREMIER was designed with the customer in mind. Delivering 40 pounds per minute at 2000 psi and supports up to 410 feet of heated hose (18,000 watts, dual heaters). Ideal for high output applications residential and commercial. Robust classic pumpline featuring touch screen and remote capabilities – polished data recording and reports are easily accessible in an intuitive user interface. FINANCING AVAILABLE
-
$18,880 |CALL FOR DETAILS!
The DutyMax GH 675DI is the preferred choice for high production professional contractors who handle hard-to-atomize materials such as silicone and other waterproofing and protective coating materials. This compact sprayer includes the ultimate portability anywhere the job demandsNEED FINANCING? WE CAN HELP. APPLY NOW!
-
SprayEZ 4500- The Workhorse Spray Machine | Delivers 45 pounds per minute and can handle 2 component materials, polyurethane foam and ExpandoThane. Ideal for use in High Output Plural Component Coatings Applications. FINANCING AVAILABLE
-
GRACO - 25P851
The Fusion ProConnect cartridge fluid o-ring kit includes replacement o-rings for the fluid section of the cartridge. These o-rings are solvent compatible and should be inspected before re-installing into the fluid housing. -
GRACO - 25P850
The Fusion ProConnect cartridge fluid o-ring kit includes replacement o-rings for the fluid section of the cartridge. These o-rings are solvent compatible and should be inspected before re-installing into the fluid housing. -
GRACO - 25P660
This toolkit is used to determine blockage in either the "A" or "B" passage way in your ProConnect Cartridge. -
GRACO - 18C116
Improve uptime with convenient Graco Gun Parts Kits. You’ll always have the proper wear parts on hand for your Fusion Gun. Kits contain everything you need to rebuild and repair your guns: O-rings, air caps, check valves, mesh filters, fluid valves and more. FEATURES Kits offer a 10% savings versus buying parts individually Compartments are clearly labeled with part numbers making reordering a breeze -
GRACO - 18C115
Fusion PC gun seal repair kit, includes all necessary O-rings for gun assembly.