.5LB OPEN CELL FOAM ON SALE FOR A LIMITED TIME!

$1,560 Per Set

 

NEED FINANCING? WE CAN HELP. APPLY NOW!

HFO Compliant, Nationally Certfied Foam

Categories: ,

Description

.5LB Light Open Cell Foam

Our .5LB  is a low viscosity, 0.5 pcf density open cell insulating material. This .5 foam  is designed to provide significant control of air infiltration along with a high R-value per inch.

This foam is a two component, light density, one to one by volume spray applied polyurethane foam. To produce this two component spray foam requires the use of an “A” component (ISO) and a blended “B” component (RESIN), which contains ZERO ozone depleting blowing agents, catalysts, polyols and fire retarding materials. This foam insulation system designed for use in residential, commercial and industrial applications. Use in lieu of more traditional forms of insulating materials such as fiberglass, cellulose or other loose fill products.

Applications

  • Exterior Walls
  • Interior Walls
  • Vented Attics
  • Unvented Attic Assemblies
  • Between Floors
  • Ceilings

 


 

GET A FOAM PRICE & SHIPPING ESTIMATE TODAY!

For foam pricing and general shipping estimates a ZIP code is required. For more accurate shipping quotes please provide a street address in the ADDITIONAL INFORMATION field below.

We’ll get back to you with your estimate as soon as possible.

Please check all that apply. For split orders, price or shipping estimate requests, please specify each foam type and number of sets in the message box below.
Need help estimating the number of sets needed for your project? Use our FOAM SET CALCULATOR HERE.
 
IF OTHER, please specify in message box below.
Please check all that apply.

What is 7+4?

 

ESTIMATE THE NUMBER OF SETS NEEDED FOR YOUR PROJECT:

sprayez foam calculator

To estimate the number of sets you will need to calculate the total square footage of all surfaces TO BE SPRAYED and subtract the square footage of your openings like windows, garage and exterior doors.

Next, calculate for the volume of you project, and multiply the area by the depth of the stud or cavity depth. Finally, divide the total volume of the area TO BE SPRAYED by the material YIELD PER SET.

You will need to round up to the higher number of WHOLE sets required to complete your project.


 

AVERGAGE SET YIELD DATA:

  • 2.0 Closed cell foam approximately 4,200-4,500 @ 1″
  • 1.7 Closed cell foam approximately 4,700 – 5,000 @ 1″
  • .5 Open cell foam approximately  17,000 – 18,000 @ 1″

 

NEED HELP?

Use our FOAM SET CALCULATOR HERE.