-
CARTRIDGE GUN - WORKS WITH ALL OF OUR CARTRIDGE MATERIALS | Note: 12cfm @ 100psi compressor required. FINANCING AVAILABLE
-
PROPORTIONER, E-XP2, R2 , 15.3KW | Next generation technology for polyurea coatings. FINANCING AVAILABLE
-
E20, 6.0KW, 230V, 1PH | For low- to medium-output foam insulation applications - applies up to 20 lb (9 kg) per minute. FINANCING AVAILABLE
-
E-30, 10KW, R2, ELITE | Next generation technology for spray foam insulation and polyurea. FINANCING AVAILABLE
-
PH2, 3HP, 220V, 3PH, RV, 120T, 14KW | Ideal for Residential Foam Insulation Applications. Offering the Most Affordable Hydraulic Proportioner with Horizontal Pumps Includes Pressure Balance Control System, Inlet Monitoring and Count Down Shutoff. FINANCING AVAILABLE
-
PHX2,5HP,220V,3PH,RV,120T,14KW | Ideal for Residential Foam Insulation Applications. Offering the Most Affordable Hydraulic Proportioner with Horizontal Pumps Includes Pressure Balance Control System, Inlet Monitoring and Count Down Shutoff. FINANCING AVAILABLE
-
PHX25,3HP,220V,3PH,RV,90T,14KW | Ideal for Use in Plural Component Coatings Applications. Includes pressure balance control system and count down shut off. FINANCING AVAILABLE
-
PH25,3HP,220V,3PH,RV,120T,15KW | Ideal for Residential Foam Insulation Applications. Includes Pressure Balance Control System and Count Down Shutoff. FINANCING AVAILABLE
-
PHX40,5HP,220V,3PH,RV,120T,21K | Ideal for use in High Output Plural Component Coatings Applications. Includes Pressure Balance Control System and Count Down Shut Off. FINANCING AVAILABLE
-
PH40,5HP,220V,3PH,RV,120T,21KW | Ideal for use in High Output Roofing Applications. Includes Pressure Balance Control System and Count Down Shut Off. FINANCING AVAILABLE
-
PH55,7.5HP,220V,3PH,RV,120T,21 | The PMC “Classic” Series was “Designed with the Customer in Mind” to provide applicator friendly and serviceability to meet today’s market place demands. FINANCING AVAILABLE
-
PHX55,7.5HP,220V,3PH,RV,120T,21KW | Ideal for use in High Output Plural Component Coatings Applications. Includes Pressure Balance Control System and Count Down Shut Off. FINANCING AVAILABLE
-
SprayEZ 3000- The Workhorse Spray Machine | Delivers 30 pounds per minute and can handle 2 component materials, polyurethane foam and ExpandoThane. Ideal for use in High Output Plural Component Coatings Applications. FINANCING AVAILABLE
-
PX-7 1/90 Mechanical Purge Gun | PX-7 incorporates a valving rod to mechanically purge the mixed material from the mixing module at the end of each shot; eliminates the need for solvent flushing or air purge. FINANCING AVAILABLE
-
Plural-Component Spray Gun with 01 (AR4242) | For high output spray polyurethane foam and polyurea applications. FINANCING AVAILABLE
-
Plural-Component Spray Gun with 01 (RD0101) | For high output spray polyurethane foam and polyurea applications. This package includes a RD0101 (01) round mix chamber with a 0.042 orifice size. FINANCING AVAILABLE
-
Plural-Component Spray Gun - Standard Round | For high output spray polyurethane foam and polyurea applications. Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite. FINANCING AVAILABLE
-
Plural-Component Spray Gun - GX7A - 1/90 / #295542 | For high output spray polyurethane foam and polyurea applications. Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite. FINANCING AVAILABLE
-
IP-01 Drum Length, Stainless Steel Transfer Pump (1:1 ratio) | IPM’s IP-01 series of pumps are general purpose transfer pumps designed for use with a wide variety of materials. The air driven motor is designed with simplicity in mind for years of use in less than desirable conditions. FINANCING AVAILABLE
-
IP-01S Stubby Length, Stainless Steel Transfer Pump (1:1 ratio) | IPM’s IP-01 series of pumps are general purpose transfer pumps designed for use with a wide variety of materials. The air driven motor is designed with simplicity in mind for years of use in less than desirable conditions. *Not for use with 5 Gallon Bucket* FINANCING AVAILABLE
-
IP-02 Drum Length Carbon Steel Transfer Pumps (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. FINANCING AVAILABLE
-
IP-02 Stubby Length, Carbon Steel Transfer Pump (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. FINANCING AVAILABLE
-
IOP232C Stainless Steel, Drum Length Transfer Pump (2:1 ratio) | Air Operated Fluid Pump which is specially designed for corrosive materials. FINANCING AVAILABLE
-
Transfer Pumps | Ideal for moving A and B materials to Reactor spray machines. FINANCING AVAILABLE
-
Transfer Pumps | Ideal for moving A and B materials to Reactor spray machines. FINANCING AVAILABLE
-
Transfer Pumps | Ideal for moving A and B materials to Reactor spray machines. FINANCING AVAILABLE
-
High Output 2:1 Transfer Pumps | PMC Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals. FINANCING AVAILABLE
-
High Output 2:1 Transfer Pumps | PMC Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals. FINANCING AVAILABLE
-
High Output 2:1 Transfer Pumps | SprayEZ Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals. FINANCING AVAILABLE
-
Compressed Air Dryer | The ADS Schulz line of air dryers was designed to facilitate inspection and maintenance operations. The panels are easily removable and allow immediate access to internal components. FINANCING AVAILABLE
-
Compressed air Dryer | The ADS Schulz line of air dryers was designed to facilitate inspection and maintenance operations. The panels are easily removable and allow immediate access to internal components. FINANCING AVAILABLE
-
Desiccant Air Dryer | This DRIERITE Disposable Desiccant Cartridge dries displacement air entering storage drums to -100° F dew point.
-
Low Pressure Braided Heated Hose - Product ID #200005 | 3/8×50 LP, W/Scuff, No TC 2,250 psi (155.13 bar). PMC’s unique heated hose system design features a copper weave element to provide full hose coverage for more efficient heating. FINANCING AVAILABLE
-
High Pressure Braided Heated Whip Hoses - Product ID MA-00040A | 1/4×10 Whip Hose, HP 3,5000 psi (241.31 bar). PVC Protective Extruded Jacket is Included. PMC’s unique heated hose system design features a copper weave element to provide full hose coverage for more efficient heating. FINANCING AVAILABLE
-
High Pressure Braided Heated Hoses - Product ID #200004 | 3/8×50 HP, W/Scuff, W/RTD 3,500 psi (241.31 bar). PMC’s unique heated hose system design features a copper weave element to provide full hose coverage for more efficient heating. FINANCING AVAILABLE
-
BUY 3 OR MORE & SAVE!
$1,150 EACH <<< CALL TO ORDER
Low Pressure Heated Hoses | Ultra flexible High Pressure heated spray foam hose. Working pressure 2250+ psi. Made to work with all styles of spray foam and polyurea spray equipment. Our hoses come in 50ft sections to reach desired length.NEED FINANCING? WE CAN HELP. APPLY NOW!
MADE IN USA / OKC. BULK ORDER DISCOUNTS -
Whip Hose with Xtreme-Wrap | 1/4 in x 10 ft Whip Hose with Xtreme-Wrap, 2,000 psi. Compatible with Reactor 1 & 2 proportioners The whip hose is designed to be lighter weight and offers improved flexibility using materials that are more durable and have higher temperature ratings.This whip hose also includes the newest electrical configuration that removes all electrical connections from near the gun. FINANCING AVAILABLE
-
Heated Hose with Xtreme-Wrap | 3/8 in x 50 ft Hose, 2000 psi (138 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Xtreme-Wrap | 3/8 in x 50 ft Hose, 2000 psi (138 Bar) with RTD fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Xtreme-Wrap | 3/8 in x 50 ft Hose, 3500 psi (241 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Xtreme-Wrap | 3/8 in x 50 ft Hose, 3500 psi (241 Bar) with RTD fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Blue Mesh Scuff Guard | 3/8 in x 50 ft Hose, 2000 psi (138 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Blue Mesh Scuff Guard | 3/8 in x 50 ft Hose, 2000 psi (138 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Blue Mesh Scuff Guard | 3/8 in x 50 ft Hose, 3500 psi (241 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Blue Mesh Scuff Guard | 3/8 in x 50 ft Hose, 3500 psi (241 Bar) with RTD fluid temperature sensor. FINANCING AVAILABLE
-
Low Pressure Braided Heated Hose - Product ID #200006 | 3/8x50'HoseAsy, LP, W/TC, W/Scuff. Hose is 3/8 inches × 50 feet with scuff and with TC. Maximum pressure: 2,250 psi (155.13 bar). PMC’s unique heated hose system design features a copper weave element to provide full hose coverage for more efficient heating. FINANCING AVAILABLE
-
Low Pressure Braided Heated Hose - Product ID #200016 | 1/2×50 LP, W/Scuff, No TC 2,250 psi (155.13 bar). PMC’s unique heated hose system design features a copper weave element to provide full hose coverage for more efficient heating. FINANCING AVAILABLE
-
Low Pressure Braided Heated Hose - Product ID #200017 | Hose is 1/2 inches × 50 feet with scuff and with TC. Maximum pressure: 2,250 psi (155.13 bar). FINANCING AVAILABLE