-
Compressed Air Dryer | The ADS Schulz line of air dryers was designed to facilitate inspection and maintenance operations. The panels are easily removable and allow immediate access to internal components. FINANCING AVAILABLE
-
Whip Hose with Xtreme-Wrap | 1/4 in x 10 ft Whip Hose with Xtreme-Wrap, 3,500 psi (241 Bar). FINANCING AVAILABLE
-
Heated Hose with Xtreme-Wrap | 3/8 in x 50 ft Hose, 2000 psi (138 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Blue Mesh Scuff Guard | 3/8 in x 50 ft Hose, 2000 psi (138 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Blue Mesh Scuff Guard | 3/8 in x 50 ft Hose, 3500 psi (241 Bar) with RTD fluid temperature sensor. FINANCING AVAILABLE
-
One Person System - Part Number: 9200-01/9210-01 | The Full Mask Systems provide a portable air source for one respirator user. Includes one full mask supplied air respirators, a 1/4 hp ambient air pump, and 50 foot breathing air hose. FINANCING AVAILABLE
-
CFM output–Regulated Speed Control | The Chill Box 8000 offers 40% more cooling capacity than the original CB 5000. Up to two (2) hoses may be used, and up to 200′ each with our standard kits. FINANCING AVAILABLE
-
This Mask Delivers Full Protection and Comfort | The Full Face Respirator Mask with Breathing Tube offers the added mesh suspension, silicone facepiece and rubber head harness.
-
O-Ring Complete Kit for Proportioning Pump
-
Quick Disconnect Airline - Male
-
Powerful and Responsive - With 01 Mixing Chamber | The Probler P2 spray gun is ideal for both polyurethane foam and polyurea applications. Its advanced double-piston design ensures the P2 is lightweight and easy to maneuver, without sacrificing performance. FINANCING AVAILABLE
-
Set of 2 Wide Open Cell Cobs for 27.5" Cutter with Short Axle
Replacement cobs set for open cell C I cutter. -
SYSTEM, EXP1, 10KW, 230V, 3PH, FUSION AP | For polyurea coatings - applies up to 2 gal (7.6 liters) per minute. FINANCING AVAILABLE
-
SprayEZ Sale! For a limited time.AP-2 and AP-3 -03 SPARE PARTS KIT
-
GRACO AP FUSION 04 ROUND / MIXING CHAMBER W CLEANOUT DRILLS
-
High Quality Airless Fluid HP Whip Hose.
-
High Quality Airless Spray Tip - Wide pattern 24"
-
AP-2 Air Purge Gun - Round with 02 Mixing Chamber | This economically priced gun weighing a mere 2.4 lbs (1.1 kg) is one of the lightest and smallest plural component spray guns on the market today. The Chamber, PCT, Screen Screw Parts, Coupling Block and Check Valves are the same parts used in the proven PMC AP-2 Air Purge Gun. FINANCING AVAILABLE
-
25 Respirator Lens Covers | These respirator lens covers are compatible with full mask air respirator.
-
High Output 2:1 Transfer Pumps | SprayEZ Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals. FINANCING AVAILABLE
-
9100-100EF – NIOSH – 100′-0″ Airline EZ Flow Hose | Hoses can be coupled together to reach the required lengths as mentioned above but only in max combinations of 3.
-
Mixing chambers w drill bits only. AP-2 Pattern control Cap (.01)
-
Plural-Component Spray Gun with 02 (AR5252) | For high output spray polyurethane foam and polyurea applications. FINANCING AVAILABLE
-
40 CASE KIT WITH CARTRIDGE GUN - 2LB FOAM INSULATION. (6 CARTRIDGES PER CASE) YIELDS 150BF PER CASE | Note: 12cfm @ 100psi compressor required. FINANCING AVAILABLE
-
Bullard® Spectrum™ Series full face respirator mask. Medium/Large size. For use with Continuous-Flow Supplied Air. 1000 Assigned Protection Factor (APF). NIOSH approved. Lightweight, low-profile, double flanged for secure sealing, optically correct lens with optional. Meets ANSI/ISEA Z87.1+ 2010 Impact Face Protection and OSHA Assigned Protection Factor (APF) of 1,000 requiring fit test.
-
IN STOCK
Chem-Trend® SprayFoam Flush 4 Spray Foam Equipment Cleaner - 1 Gallon Container Chem-Trend® SprayFoam Flush 4 is a flushing solvent and cleaner for spray foam equipment. It is a very effective cleaner that helps remove polyurethane components from metal and plastic surfaces. -
Plural-Component Spray Gun with 01 (AR4242) | For high output spray polyurethane foam and polyurea applications. FINANCING AVAILABLE
-
CFM output–Regulated Speed Control | The Chill Box 8000 offers 40% more cooling capacity than the original CB 5000. Up to two (2) hoses may be used, and up to 200′ each with our standard kits. FINANCING AVAILABLE
-
Hood, Headband, Breathing Tube, Belt & Clip | White Tyvek Hood, complete with Headband, Breathing Tube, Belt & Clip, for use with the CB8000 Air Conditioned Fresh Air Supply system.
-
Non-Gelling ISO-Neutralizer & Isocyanate Cleaner | Enhanced worker safety, environmentally friendly designed to remove Flexible and Rigid SINGLE COMPONENT Part A excess liquid Isocyanate with or without solid material or PART B (Liquid Polyol) from processing equipment (feed line, feed tanks, mixing and metering equipment). FINANCING AVAILABLE