-
High Pressure Braided Heated Hoses- Product ID #200019 | Hose is 1/2 inches × 50 feet with scuff and without TC. Maximum pressure: 3,500 psi (241.31 bar). FINANCING AVAILABLE
-
High Pressure Braided Heated Hoses - Product ID #200025 | Hose is 1/2 inches × 50 feet with scuff and with RTD. Maximum pressure: 3,500 psi (241.31 bar). FINANCING AVAILABLE
-
High Output 2:1 Transfer Pumps | PMC Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals. FINANCING AVAILABLE
-
High Output 2:1 Transfer Pumps | PMC Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals. FINANCING AVAILABLE
-
AP-2 Air Purge Gun - Round with 02 Mixing Chamber | This economically priced gun weighing a mere 2.4 lbs (1.1 kg) is one of the lightest and smallest plural component spray guns on the market today. The Chamber, PCT, Screen Screw Parts, Coupling Block and Check Valves are the same parts used in the proven PMC AP-2 Air Purge Gun. FINANCING AVAILABLE
-
Extreme Air Purge Gun | This economically priced gun weighing a mere 2.4 lbs (1.1 kg) is one of the lightest and smallest plural component spray guns on the market today. The Chamber, PCT, Screen Screw Parts, Coupling Block and Check Valves are the same parts used in the proven PMC AP-2 Air Purge Gun. FINANCING AVAILABLE
-
IOP232C Stainless Steel, Drum Length Transfer Pump (2:1 ratio) | Air Operated Fluid Pump which is specially designed for corrosive materials. FINANCING AVAILABLE
-
IP-02 (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. IP-02 Stubby Length Transfer Pump, Stainless Steel FINANCING AVAILABLE
-
IP-02 Stubby Length, Carbon Steel Transfer Pump (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. FINANCING AVAILABLE
-
IP-02 Drum Length, Stainless Steel Transfer Pump (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. FINANCING AVAILABLE
-
IP-02 Drum Length Carbon Steel Transfer Pumps (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. FINANCING AVAILABLE
-
IP-01S Stubby Length, Stainless Steel Transfer Pump (1:1 ratio) | IPM’s IP-01 series of pumps are general purpose transfer pumps designed for use with a wide variety of materials. The air driven motor is designed with simplicity in mind for years of use in less than desirable conditions. *Not for use with 5 Gallon Bucket* FINANCING AVAILABLE
-
IP-01 Drum Length, Stainless Steel Transfer Pump (1:1 ratio) | IPM’s IP-01 series of pumps are general purpose transfer pumps designed for use with a wide variety of materials. The air driven motor is designed with simplicity in mind for years of use in less than desirable conditions. FINANCING AVAILABLE
-
Hydraulic Proportioner Package with Fusion AP Spray Gun and Heated Hose with Scuff Guard | Guided by both simplicity and reliability, Gusmer's point-to-point wired electrical cabinet sits atop Graco's industry-proven hydraulic Reactor 2 chassis, including the Reactor horizontal pump line, fluid heaters, and hydraulic system. FINANCING AVAILABLE
-
Whip Hose with Xtreme-Wrap, 1/4 in (6.3mm) inside diameter x 10 ft (3 m), 2000 psi (138 Bar). FINANCING AVAILABLE
-
Whip Hose with Xtreme-Wrap | 1/4 in x 10 ft Whip Hose with Xtreme-Wrap, 3,500 psi (241 Bar). FINANCING AVAILABLE