-
SYSTEM, PKG, E-XP2, R2, AP | Graco's hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEM's or applicators that spray at high volumes. FINANCING AVAILABLE
-
E-XP2, R2, ELITE | Next generation technology for polyurea coatings. FINANCING AVAILABLE
-
EXP1, 10KW, 230V, 1PH, FUSION AP | For polyurea coatings - applies up to 2 gal (7.6 liters) per minute. FINANCING AVAILABLE
-
XP1, 10.2KW, 230, 3PH | For polyurea coatings - applies up to 2 gal (7.6 liters) per minute. FINANCING AVAILABLE
-
XP1, 10.2KW, 230V, 1PH | For polyurea coatings - applies up to 2 gal (7.6 liters) per minute. FINANCING AVAILABLE
-
H-XP2, SEL, 15KW, HR2 ELITE | Graco's hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEM's or applicators that spray at high volumes. FINANCING AVAILABLE
-
H-XP2, SEL, 15KW, HR2 | Graco's hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEM's or applicators that spray at high volumes. FINANCING AVAILABLE
-
HXP2, SEL, 15KW, R2, ELITE, AP | Graco's hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEM's or applicators that spray at high volumes. FINANCING AVAILABLE
-
SYSTEM, HXP2, SEL, 15KW, R2, AP | Graco's hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEM's or applicators that spray at high volumes. FINANCING AVAILABLE
-
E20, 6.0KW, 230V, 3PH | Electric Foam Proportioner. For low- to medium-output foam insulation applications - applies up to 20 lb (9 kg) per minute. FINANCING AVAILABLE
-
E-30, 10KW, R2 | Next generation technology for spray foam insulation and polyurea. FINANCING AVAILABLE
-
IP-02 (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. IP-02 Stubby Length Transfer Pump, Stainless Steel FINANCING AVAILABLE
-
IP-02 Drum Length, Stainless Steel Transfer Pump (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. FINANCING AVAILABLE
-
Plural-Component Spray Gun - Flat Tip Package | For high output spray polyurethane foam and polyurea applications. FINANCING AVAILABLE
-
Powerful and Responsive - With 01 Mixing Chamber | The Probler P2 spray gun is ideal for both polyurethane foam and polyurea applications. Its advanced double-piston design ensures the P2 is lightweight and easy to maneuver, without sacrificing performance. FINANCING AVAILABLE
-
Plural-Component Spray Gun - Flat Tip Package | For high output spray polyurethane foam and polyurea applications. FINANCING AVAILABLE
-
Plural-Component Spray Gun - Wide Round | For high output spray polyurethane foam and polyurea applications. Wide round mixing chamber provides a 50% wider pattern. FINANCING AVAILABLE
-
Plural-Component Spray Gun - Wide Round | For high output spray polyurethane foam and polyurea applications. Wide round mixing chamber provides a 50% wider pattern. FINANCING AVAILABLE
-
Plural-Component Spray Gun with FL0202 Mixing Chamber | For high output spray polyurethane foam and polyurea applications. This package includes a flat tip with a 0.052 orifice size. FINANCING AVAILABLE
-
Plural-Component Spray Gun with FL0101 Mixing Chamber | For high output spray polyurethane foam and polyurea applications. This package includes a flat tip with a 0.042 orifice size. FINANCING AVAILABLE
-
Plural-Component Spray Gun with 02 (WD0202) | For high output spray polyurethane foam and polyurea applications. This package includes a WD0202 (02) wide round mix chamber with a 0.046 orifice size. FINANCING AVAILABLE
-
Plural-Component Spray Gun with 01 (WD0101) | For high output spray polyurethane foam and polyurea applications. This package includes a WD0101 (01) wide round mix chamber with a 0.039 orifice size. FINANCING AVAILABLE
-
Powerful and Responsive - With 01 Mixing Chamber | The Probler P2 spray gun is ideal for both polyurethane foam and polyurea applications. Its advanced double-piston design ensures the P2 is lightweight and easy to maneuver, without sacrificing performance. FINANCING AVAILABLE
-
Powerful and Responsive - With 01 Mixing Chamber | The Probler P2 spray gun is ideal for both polyurethane foam and polyurea applications. Its advanced double-piston design ensures the P2 is lightweight and easy to maneuver, without sacrificing performance. FINANCING AVAILABLE
-
Plural-Component Spray Gun with 02 (RD0202) | For high output spray polyurethane foam and polyurea applications. This package includes a RD0202 (02) round mix chamber with a 0.052 orifice size. FINANCING AVAILABLE
-
Plural-Component Spray Gun with 02 (AR5252) | For high output spray polyurethane foam and polyurea applications. FINANCING AVAILABLE
-
PX-7 Pour Gun | PX-7 incorporates a valving rod to mechanically purge the mixed material from the mixing module at the end of each shot; eliminates the need for solvent flushing or air purge. FINANCING AVAILABLE
-
Bare, 1 Phase, 230 V Gusmer GH-2 Hydraulic Proportioner Package | Guided by both simplicity and reliability, Gusmer's point-to-point wired electrical cabinet sits atop Graco's industry-proven hydraulic Reactor 2 chassis, including the Reactor horizontal pump line, fluid heaters, and hydraulic system. FINANCING AVAILABLE
-
SYSTEM,GH-2,10KW,3PH,AP | Hydraulic Proportioner Package with Fusion AP Spray Gun and Heated Hose with Scuff Guard. Guided by both simplicity and reliability, Gusmer's point-to-point wired electrical cabinet sits atop Graco's industry-proven hydraulic Reactor 2 chassis, including the Reactor horizontal pump line, fluid heaters, and hydraulic system. FINANCING AVAILABLE
-
High Pressure Braided Heated Whip Hoses - Product ID MA-00040A-50 | 1/4 in × 50 ft Whip Hose, HP 3,5000 psi (241.31 bar). PVC Protective Extruded Jacket (Included). PMC’s unique heated hose system design features a copper weave element to provide full hose coverage for more efficient heating. FINANCING AVAILABLE
-
High Pressure Braided Heated Whip Hoses - Product ID MA-00040A-25 | 1/4 in × 25 ft Whip Hose, HP 3,5000 psi (241.31 bar). PVC Protective Extruded Jacket is Included. PMC’s unique heated hose system design features a copper weave element to provide full hose coverage for more efficient heating. FINANCING AVAILABLE
-
High Pressure Braided Heated Hoses - Product ID #200025 | Hose is 1/2 inches × 50 feet with scuff and with RTD. Maximum pressure: 3,500 psi (241.31 bar). FINANCING AVAILABLE
-
High Pressure Braided Heated Hoses - Product ID #200024 | Hose is 1/2 inches × 50 feet with scuff and with TC. Maximum pressure: 3,500 psi (241.31 bar). FINANCING AVAILABLE
-
High Pressure Braided Heated Hoses- Product ID #200019 | Hose is 1/2 inches × 50 feet with scuff and without TC. Maximum pressure: 3,500 psi (241.31 bar). FINANCING AVAILABLE
-
High Pressure Braided Heated Hoses - Product ID #200008 | Hose is 3/8 inches × 50 feet with scuff and with TC. Maximum pressure: 3,500 psi (241.31 bar). FINANCING AVAILABLE
-
High Pressure Braided Heated Hoses - Product ID #200007 | Hose is 3/8 inches × 50 feet with scuff and without TC. Maximum pressure: 3,500 psi (241.31 bar). FINANCING AVAILABLE
-
Low Pressure Braided Heated Hose - Product ID #200018 | Hose is 1/2 inches × 50 feet with scuff and with RTD. Maximum pressure: 2,250 psi (155.13 bar). FINANCING AVAILABLE
-
Low Pressure Braided Heated Hose - Product ID #200017 | Hose is 1/2 inches × 50 feet with scuff and with TC. Maximum pressure: 2,250 psi (155.13 bar). FINANCING AVAILABLE
-
Low Pressure Braided Heated Hose - Product ID #200016 | 1/2×50 LP, W/Scuff, No TC 2,250 psi (155.13 bar). PMC’s unique heated hose system design features a copper weave element to provide full hose coverage for more efficient heating. FINANCING AVAILABLE
-
Low Pressure Braided Heated Hose - Product ID #200006 | 3/8x50'HoseAsy, LP, W/TC, W/Scuff. Hose is 3/8 inches × 50 feet with scuff and with TC. Maximum pressure: 2,250 psi (155.13 bar). PMC’s unique heated hose system design features a copper weave element to provide full hose coverage for more efficient heating. FINANCING AVAILABLE
-
Heated Hose with Blue Mesh Scuff Guard | 3/8 in x 50 ft Hose, 3500 psi (241 Bar) with RTD fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Blue Mesh Scuff Guard | 3/8 in x 50 ft Hose, 3500 psi (241 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Blue Mesh Scuff Guard | 3/8 in x 50 ft Hose, 2000 psi (138 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Blue Mesh Scuff Guard | 3/8 in x 50 ft Hose, 2000 psi (138 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Xtreme-Wrap | 3/8 in x 50 ft Hose, 3500 psi (241 Bar) with RTD fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Xtreme-Wrap | 3/8 in x 50 ft Hose, 3500 psi (241 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Xtreme-Wrap | 3/8 in x 50 ft Hose, 2000 psi (138 Bar) with RTD fluid temperature sensor. FINANCING AVAILABLE
-
Heated Hose with Xtreme-Wrap | 3/8 in x 50 ft Hose, 2000 psi (138 Bar) with thermocouple fluid temperature sensor. FINANCING AVAILABLE