-
IP-02 (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. IP-02 Stubby Length Transfer Pump, Stainless Steel FINANCING AVAILABLE
-
BUY 3 OR MORE & SAVE!
$1,150 EACH <<< CALL TO ORDER
Low Pressure Heated Hoses | Ultra flexible High Pressure heated spray foam hose. Working pressure 2250+ psi. Made to work with all styles of spray foam and polyurea spray equipment. Our hoses come in 50ft sections to reach desired length.NEED FINANCING? WE CAN HELP. APPLY NOW!
MADE IN USA / OKC. BULK ORDER DISCOUNTS -
Whip Hose with Xtreme-Wrap, 1/4 in (6.3mm) inside diameter x 10 ft (3 m), 2000 psi (138 Bar). FINANCING AVAILABLE
-
IP-02 Stubby Length, Carbon Steel Transfer Pump (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. FINANCING AVAILABLE
-
IP-01 Drum Length, Stainless Steel Transfer Pump (1:1 ratio) | IPM’s IP-01 series of pumps are general purpose transfer pumps designed for use with a wide variety of materials. The air driven motor is designed with simplicity in mind for years of use in less than desirable conditions. FINANCING AVAILABLE
-
Lightest Sprayer in it's Class! Spray 50-75 gallons of coating materials every week with the Titan Impact 410 Airless Paint Sprayer. This fully featured sprayer comes equipped with the proven Quad+ packing from the Impact 440. Sprays stains, lacquers, enamels, latex, and other low & medium viscosity coatings. FINANCING AVAILABLE -
High Output 2:1 Transfer Pumps | SprayEZ Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals. FINANCING AVAILABLE
-
High Pressure Braided Heated Whip Hoses - Product ID MA-00040A | 1/4×10 Whip Hose, HP 3,5000 psi (241.31 bar). PVC Protective Extruded Jacket is Included. PMC’s unique heated hose system design features a copper weave element to provide full hose coverage for more efficient heating. FINANCING AVAILABLE
-
Specially Designed with the User in Mind Comes equipped with Titan's Intelligent Control System. FINANCING AVAILABLE -
Complete Axle Assembly Set for Open Cell C I Cutters | Includes: Axle, Bushings, Sprockets, Bearings and Cobs
-
Remarkable VOC Free Plural Component Polyurea | The RockHard spray-on Bedliner is a durable self adhering rock hard Polyurea that is manufactured on the truck bed itself. FINANCING AVAILABLE
-
FOAM INSULATION STARTER KIT- INCLUDES CARTRIDGE GUN AND 1 CASE OF MATERIAL (10lb) | Note: Needs applicator and 12cfm @ 100psi compressor. FINANCING AVAILABLE
-
FOAM INSULATION STARTER KIT- INCLUDES CARTRIDGE GUN AND 1 CASE OF MATERIAL 2LB | Note: Needs applicator and 12cfm @ 100psi compressor. FINANCING AVAILABLE
-
The Pneumatic Drum Mixer is a very effective tool in mixing in 55 Gallon drums. FINANCING AVAILABLE
-
IP-01S Stubby Length, Stainless Steel Transfer Pump (1:1 ratio) | IPM’s IP-01 series of pumps are general purpose transfer pumps designed for use with a wide variety of materials. The air driven motor is designed with simplicity in mind for years of use in less than desirable conditions. *Not for use with 5 Gallon Bucket* FINANCING AVAILABLE
-
MAGENTA/YELLOW Filter, NIOSH Rating HEPA, Magenta, Compatible with Brand and Series Bullard EVA Series, Respirator Cartridge Type PAPR, Respirator Connection Type Threaded, Package Quantity 6
-
SprayEZ Sale! For a limited time.03 TIP Kit - Complete Kit
-
Our 55 gallon drum heaters feature quick heat-up time and the precision of a digital controller that prevent freezing, assist in viscosity control and keep the material at elevated temperatures. Measures temperature in degrees fahrenheit.
-
CARTRIDGE GUN - WORKS WITH ALL OF OUR CARTRIDGE MATERIALS | Note: 12cfm @ 100psi compressor required. FINANCING AVAILABLE
-
80 R PUMP REBUILD KIT | 3000 psi | KT-07003
-
80 A PUMP REBUILD KIT | 3000 psi | KT-07002
-
120 R PUMP REBUILD KIT | 2000 psi | KT-07001
-
TALLER DE ESPUMA PULVERIZADA – INSCRIPCIÓN
DATE: AUGUST 20-21, 2024 RESERVE YOUR SEAT AND PURCHASE TODAY! COST: The cost for the 2-Day Training is $595 FOR TWO ATTENDEES. PLEASE NOTE: Lodging and transportation are not included. LOCATION: Oklahoma City, OK Facility EXPERIENCE LEVEL: Beginner and intermediate SEATING IS LIMITED, RESERVE YOUR SPOT NOW! -
TALLER DE LEVANTAMIENTO DE HORMIGÓN – INSCRIPCIÓN
DATE: AUGUST 13-14, 2024 RESERVE YOUR SEAT AND PURCHASE TODAY! COST: The cost for the 2-Day Training is $595 FOR TWO ATTENDEES. PLEASE NOTE: Lodging and transportation are not included. LOCATION: Oklahoma City, OK Facility EXPERIENCE LEVEL: Beginner and intermediate SEATING IS LIMITED, RESERVE YOUR SPOT NOW! -
ELECTRIC SPRAY FOAM INSULATION SAW for SOFT 1/2 LB FOAM | The PUSAWE electric polyurethane spray foam insulation scarfing saw includes the toughest Milwaukee® brand heavy-duty orbital around, which has a custom coupling to secure a 36" long serrated blade intended for trimming 1/2 lb foam. FINANCING AVAILABLE
-
High Quality Airless Fluid Hose FINANCING AVAILABLE