-
Ideally Suited for Prepping a Truck Bed | This cup brush is ideally suited for prepping a truck bed for increased adhesion of the spray-on liners. Prep up to 50 trucks with one cup brush and do a better job with less effort and in half of the time required for hand scuffing.
-
$2,000 Per Set
REGULAR PRICE: $2,425 Per Set
Low viscosity, high-density 4.0LB closed cell concrete lifting foam. This 4.0 LB foam has been specially formulated for optimal performance in concrete slab lifting, slab stabilization and undersealing.NEED FINANCING? WE CAN HELP. APPLY NOW!
-
$2,000 Per Set
REGULAR PRICE: $2,425 Per Set
Low viscosity, high-density 2.0LB closed cell polyurethane foam lifting material. This 2.0 LB foam has been specially formulated for optimal performance in concrete slab lifting, slab stabilization and undersealing.NEED FINANCING? WE CAN HELP. APPLY NOW!
-
IOP232C Stainless Steel, Drum Length Transfer Pump (2:1 ratio) | Air Operated Fluid Pump which is specially designed for corrosive materials. FINANCING AVAILABLE
-
IP-02 (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. IP-02 Stubby Length Transfer Pump, Stainless Steel FINANCING AVAILABLE
-
IP-02 Stubby Length, Carbon Steel Transfer Pump (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. FINANCING AVAILABLE
-
IP-02 Drum Length, Stainless Steel Transfer Pump (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. FINANCING AVAILABLE
-
IP-02 Drum Length Carbon Steel Transfer Pumps (2:1 ratio) | IPM’s IP-02 series of pumps are specially designed for use with difficult to handle materials. The immersed lower pump, tie tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture. FINANCING AVAILABLE
-
IP-01S Stubby Length, Stainless Steel Transfer Pump (1:1 ratio) | IPM’s IP-01 series of pumps are general purpose transfer pumps designed for use with a wide variety of materials. The air driven motor is designed with simplicity in mind for years of use in less than desirable conditions. *Not for use with 5 Gallon Bucket* FINANCING AVAILABLE
-
IP-01 Drum Length, Stainless Steel Transfer Pump (1:1 ratio) | IPM’s IP-01 series of pumps are general purpose transfer pumps designed for use with a wide variety of materials. The air driven motor is designed with simplicity in mind for years of use in less than desirable conditions. FINANCING AVAILABLE
-
29" SPRAY FOAM HAND SAW TRIMMING KNIFE | Demand's 29" Scarfing Spray Foam Hand Saw is the finest in the industry.
-
Hydraulic Proportioner Package with Fusion AP Spray Gun and Heated Hose with Scuff Guard | Guided by both simplicity and reliability, Gusmer's point-to-point wired electrical cabinet sits atop Graco's industry-proven hydraulic Reactor 2 chassis, including the Reactor horizontal pump line, fluid heaters, and hydraulic system. FINANCING AVAILABLE
-
The Best Polyurethane Foam & Resin Remover for the Spray Foam Industry - 5 Gallon Container | Enhanced worker safety, environmentally friendly, non-hazardous, non-flammable, non-HAPs, non-Chlorinated,non-Aerosol, BIODEGRADABLE solvent-based cleaner designed to remove Flexible and Rigid TWO COMPONENT Polyurethane Foam Adhesives. FINANCING AVAILABLE
-
A Companion Product to GSP’s Resin and Urethane Foam Remover - 5 Gallon Container | SURF A LUBE is a companion product to NZD ISO FLUSH and SURF X-FLUSH 2000. It is used to store urethane dispensing equipment for an extended period of time. FINANCING AVAILABLE
-
Non-Gelling ISO-Neutralizer & Isocyanate Cleaner | Enhanced worker safety, environmentally friendly designed to remove Flexible and Rigid SINGLE COMPONENT Part A excess liquid Isocyanate with or without solid material or PART B (Liquid Polyol) from processing equipment (feed line, feed tanks, mixing and metering equipment). FINANCING AVAILABLE