Plural-Component Spray Gun – Standard Round | For high output spray polyurethane foam and polyurea applications. Whether you’re spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.
GRACO FUSION MP – STANDARD ROUND | #247211
$4,250.00
Description
Plural-Component Spray Gun Standard Round
For high output spray polyurethane foam and polyurea applications.
Whether you’re spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.
Features
- Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
- Long-lasting PolyCarballoy mix module
- Advanced mix module and tip provides superior mixing capabilities
Materials
- Polyurethane
- Roof Coatings
- Polyurea
- Spray Polyurethane Foam
- No-Heat Foam
Applications
- Roof Coatings
- Pipe and Tank Coating
- Secondary Containment Spill Prevention
- Spray On Bedliners
- Waterproofing
- Roof and Wall Insulation
- Air Sealing Attics and Rim Joists
Industries
- Bridge Construction and Maintenance
- Foam Insulation
Product Data & Resources
All GRACO Fusion MP documentation, manuals and resources available HERE.
Below the most important manuals provided by the manufacturer:
GRACO Fusion MP | Instructions and Parts >
GRACO Fusion MP | Hoses – Guns – Accessories >
Additional information
| Weight | 10 lbs |
|---|---|
| Dimensions | 16 × 13 × 5 in |
| Maximum Fluid Working Pressure | 3,500 psi |
| Minimum Air Inlet Pressure | 80 psi |
| Maximum Air Inlet Pressure | 130 psi |
| Maximum Fluid Temperature | 200°F |
| Air Inlet Size | 1/4 npt Quick Disconnect Nipple |
| A Component (ISO) Inlet Size | -5 JIC; 1/2-20 UNF |
| B Component (Resin) Inlet Size | -6 JIC; 9/16-18 UNF |
| Typical Flow rate | See charts in instruction manual |
| Sound Pressure | 70 dB(A), at 100 psi (0.7 MPa, 7 bar) |
| Sound Power | 79.9 dB(A), at 100 psi (0.7 MPa, 7 bar) |
| Dimensions | 7.6 x 8.1 x 3.1 in |
| Weight | 2.9 lb |
| Wetted Parts | Aluminum, stainless steel, carbon steel, chemically resistant o-rings, ultra-high molecular weight polyethylene (UHMWPE), Polycarballoy™, CeramTip™ |
