Plural-Component Spray Gun with 01 (AR4242) | For high output spray polyurethane foam and polyurea applications.
GRACO FUSION AP – #246101 | 01 ROUND CHAMBER
$3,440.00
Description
Plural-Component Spray Gun with 01 Round Mixing Chamber (AR4242)
For high output spray polyurethane foam and polyurea applications. With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix. Includes AR4242 (01) mix chamber with a 0.042 orifice size.
Features
- Easy air-blast tip cleaning reduces build-up and tip clogging.
- Long-lasting side seals means less downtime for maintenance
- Quick-release fluid housing – lets you easily change the mix chambers without tools
- Hand-tightened front cap – no tools needed to clean and maintain seals and mix chamber
- Ergonomic handle
Materials
- Adhesives
- HB Fuller Flextra-Fast WD4120 & WD4132
- Polyurethane
- Polyurea
- Polyurethane Coatings
- Spray Polyurethane Foam
Applications
- Roof Coatings
- Pipe and Tank Coating
- Secondary Containment Spill Prevention
- Spray On Bedliners
- Waterproofing
- Roof and Wall Insulation
Industries
- Foam Insulation
Product Data & Resources
All GRACO Fusion Air Purge documentation, manuals and resources available HERE.
Below the most important manuals provided by the manufacturer:
GRACO Fusion Air Purge | Instructions and Parts >
GRACO Fusion Air Purge | Hoses – Guns – Accessories >
GRACO Fusion Air Purge | Gun Parts Kit >
Additional information
| Weight | 10 lbs |
|---|---|
| Dimensions | 16 × 13 × 5 in |
| Maximum Fluid Working Pressure | 3,500 psi |
| Minimum Air Inlet Pressure | 80 psi |
| Maximum Air Inlet Pressure | 130 psi |
| Air Flow Range | See chart in instruction manual |
| Typical Flow Rate of Round Pattern Guns | See chart in instruction manual |
| Typical Flow Rate of Flat Pattern Guns | See chart in instruction manual |
| Maximum Fluid Temperature | 200°F |
| Air Inlet Size | 1/4 npt Quick Disconnect Nipple |
| A Component (ISO) Inlet Size | -5 JIC; 1/2-20 UNF |
| B Component (Resin) Inlet Size | -6 JIC; 9/16-18 UNF |
| Sound Pressure | 81.1 dB(A) |
| Sound Power | Measured per ISO 9416–2: 91.0 dB(A) |
| Dimensions | 7.5 x 8.1 x 3.3 in |
| Weight | 2.5 lb |
| Wetted Parts | Aluminum, stainless steel, carbon steel, carbide, chemically resistant o-rings |
