High Output 2:1 Transfer Pumps | PMC Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals.
PMC GHO
$2,625.00
Description
High Output 2:1 Transfer Pumps
PMC Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals.
- GHO 2:1 High Output Stainless Steel Transfer Pump for 55-Gallon Drums
Product Data & Resources
All PMC GHO transfer pump documentation, manuals and resources available HERE.
Below the most important manuals provided by the manufacturer:
Additional information
| Weight | 28.0 lbs |
|---|---|
| Dimensions | 8.0 × 8.0 × 55.0 in |
| Pressure Ratio | 2.2:1 |
| Output (Cont. Duty) | 5.5 Gals/min |
| Output (Int. Duty) | 11 Gals/min |
| Heater Wattage | 18.5 Cycles per Gallon |
| Cycles per Liter | 4.88 Cycles |
| Stroke | 4″ (10.2 cm) |
| Maximum Air Pressure | 120 psi (8.273 bar) |
| Air Inlet | 1/4 NPT (F) |
| Fluid Output | 3/4 NPT (F) |
| Air Consumption | 2.0 cfm per gallon-pumped @ 100 psi |
| Weight | 25 lbs (11.4 kg) |
| Length | 48.92”(1242.6 mm) |
