PMC GHO

$2,625.00

High Output 2:1 Transfer Pumps | PMC Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals.

FINANCING AVAILABLE

Description

High Output 2:1 Transfer Pumps

PMC Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals.

  • GHO 2:1 High Output Stainless Steel Transfer Pump for 55-Gallon Drums

Product Data & Resources

All PMC GHO transfer pump documentation, manuals and resources available HERE.
Below the most important manuals provided by the manufacturer:

PMC GHO | Manual >

Additional information

Weight 28.0 lbs
Dimensions 8.0 × 8.0 × 55.0 in
Pressure Ratio

2.2:1

Output (Cont. Duty)

5.5 Gals/min
(20.8 Liters/min)

Output (Int. Duty)

11 Gals/min
(41.6 Liters/min)

Heater Wattage

18.5 Cycles per Gallon

Cycles per Liter

4.88 Cycles

Stroke

4″ (10.2 cm)

Maximum Air Pressure

120 psi (8.273 bar)

Air Inlet

1/4 NPT (F)

Fluid Output

3/4 NPT (F)

Air Consumption

2.0 cfm per gallon-pumped @ 100 psi
124.67 cc/sec per liter pumped @ 689 kpa

Weight

25 lbs (11.4 kg)

Length

48.92”(1242.6 mm)
Used w/55 gallon drums