1.5 Pound Foam 40 Case (7,600 Board Feet) Package DealW/Fastkick Applicator
During application, to obtain heavier build thickness, it is important to apply a heavy one-pass delivery. Do not dispense multi-passes as pinholing will occur. Substrate must be dry while relative humidity < 85%. SprayEZ 1.5 Closed Cell foam may be applied from 40°F to 100°F in high humidity climates with target surfaces clean and moisture free.
R-Factor approx, 5 per inch
1.5 lb Closed CELL FOAM SPECIFICATION:
|DENSITY (PCF)||ASTM D1622||1.5(1.5)|
|Fire Rating||ASTM E84||Class 1|
|Thermal Resistance (Rvalue)||ASTM C518||4.5 (5.7)|
|Compressive Strength (psi)||ASTM D1621||15|
|Shear Strength (psi)||ASTM C273||18|
|Shear Modulus||ASTM C273||207|
|Tensile Strength (psi)||ASTM D1623||30|
|Flexual Strength (psi)||ASTM C203||45|
|Flexual Modulus||ASTM C203||164|
|Water Absorption (%vol)||ASTM D2842||<1.0|
|Water Vapor (perm-in)||ASTM E96||<1.0|
|Fungi Resistance||ASTM C 1338||None|
|Closed Cell Content (%)||ASTM D2856||>60|
1 "FastKick" Plural Component dispensing gun
40 cases of SprayEZ 1.5lb Closed Cell density Cell Spray foam.
240 static mixing tubes
Note: Please leave a daytime phone number you can be reached at, on the checkout instructions page.
THIS KIT WILL YIELD 7,600 BOARD FEET ( one sq ft by 1 inch thick )
Material temperature must be 80-90 degrees prior to spraying.