SprayEZ 2 lb Closed Cell Foamoffers a unique blend of properties which yield excellent mechanical and thermally efficient structures. SprayEZ foams deliver high compressive/shear strength, insulating capacity, overall toughness and impact resistance. Their high performance strength to weight ratio densities produce a wide range of applications for very diverse industries. As an energy saving material yielding very high insulating values, paralleled with its sound absorbing capability it has seen much use in the architectural and construction industries. Fire retardant formulations are used in structural public buildings and warehouses. Installation cure times range from 10 to 20 seconds to touch, full cure up to 12-24 hours depending on ambient temperature and humidity. CLASS 1 FIRE RATED
During application, to obtain heavier build thickness, it is important to apply a heavy one-pass delivery. Do not dispense multi-passes as pinholing will occur. Substrate must be dry whilerelative humidity < 85% Closed Cell foam may be applied from 40°F to 100°F in high humidity climateswith target surfaces clean and moisture free.
R-Factor approx, 6.8 per inch
2 lb Closed CELL FOAM SPECIFICATION:
Thermal Resistance (Rvalue)
Compressive Strength (psi)
Shear Strength (psi)
Tensile Strength (psi)
Flexual Strength (psi)
Water Absorption (%vol)
Water Vapor (perm-in)
ASTM C 1338
Closed Cell Content (%)
1 "FastKick" Plural Component dispensing gun
20 cases of DIY 2.0lb Closed Cell density Cell Spray foam.
120 static mixing tubes
Note: Please leave a daytime phone number you can be reached at, on the checkout instructions page.
THIS KIT WILL YIELD 3000 BOARD FEET ( one sq ft by 1 inch thick )
Material temperature must be 80-90 degrees prior to spraying.